After this modem correct work on Raspberry Pi without ‘udev’ rule.īus 001 device 005: ID 12d1:15ca <- Huawei is usually 12d1 Try disable virtual cd-rom and change work mode “only modem”.
#MODEM CLARO HUAWEI E3531 SERIAL#
To work around this problem, follow the procedure to create udev rule on a configuration USB stick for the device to switch to serial mode. Huawei modems on Raspberry Pi (and similar) devicesįor some unknown reason, the rule that converts these modems from storage devices into serial devices does not run automatically.
Search in the Gammu database for modems with AT connection. You will need a USB GSM stick modem or device like SIM800L v2 connected via USB UART.
#MODEM CLARO HUAWEI E3531 INSTALL#
Note: When running Home Assistant, you need to install the SSH add-on. If the integration is used with the Home Assistant Operating System, then version 3.6 or higher is required.įor installations not running on Home Assistant or Home Assistant Core using Docker, you must install gammu-dev package: sudo apt-get install libgammu-devīefore running for the first time, check that the system recognizes the modem by running: ls -l /dev/*USB* To use notifications, please see the getting started with automation page.
You can also receive SMS messages that are sent to the SIM card number in your device.Įvery time there is a message received, event: sms.incoming_sms is fired with date, phone number and text message.
0 kommentar(er)
